Copper nut
Product Name: copper nut
Product specifications: m1.6, M2.5, m3, M4, M5, M6, M8, M12, M14, M16, etc
Surface treatment: copper plating
Product grade: grade 4.8
Product application: copper nut, also known as embedded nut and inlaid copper nut or plastic embedded nut, can be divided into hot-melt copper nut, hot pressed copper nut, embedded copper nut and ultrasonic copper nut according to different application methods
The product is widely used in the embedded parts of mobile phone shell / notebook shell / injection molded parts / plastic parts. It is used as an internal thread. Generally, the outer circle is embossed to prevent sliding.
Product features: another main use of copper nut is injection molding, which is embedded into plastic parts after heating or injection molding directly,
Hot pressed or cold pressed copper nut
Brass has good thermal conductivity. If the heated copper nut is embedded, on the one hand, the copper nut can quickly heat up and speed up the work efficiency. On the other hand, the heated copper nut can quickly transfer heat to the plastic parts, so as to soften the periphery of the plastic hole and facilitate pressing into the hole; So, what will be the effect if the injection mold is used? As we all know, the melting point of PA / nylon / pet is above 200 ° C. after the copper nut is hot melted into the plastic part, the temperature increases rapidly. After injection molding, the plastic body cools and hardens rapidly. If the copper nut temperature is still at high temperature, what will be the result? Smart you must have guessed that the result is that the place where the copper nut contacts the plastic part is loose or cracked. Therefore, copper nuts are used in injection molding instead of s
Related products
-
hot dip galvanizing crossarm
Product Description: Custom processing: Yes Specifications 50*5, 63*6, 75*8, 80*8 can be customized Type Ironwork Surface treatment galvanized Scope of application Product introduction: The hot-dip galvanized cross arm is an important power fastener used in the poles and towers in the overhead lines. It is the angle iron fixed laterally on the top of the poles; the cross arms are used to support the lines, lightning protection lines and installations in the overhead lines. Insulators and supp...
-
High-strength bolts
Bolts made of high-strength steel, or bolts that require a larger pre-tightening force, can be called high-strength bolts. High-strength bolts are mostly used for the connection of bridges, steel rails, high-pressure and ultra-high-pressure equipment. The fracture of this kind of bolt is mostly brittle fracture. High-strength bolts applied to ultra-high pressure equipment need to be pre-stressed in order to ensure the sealing of the container. Process flow The process flow of high-strength bo...
-
Square gasket
Model number 40*40*3, 50*50*4, 100*100*8 Washer outer diameter 40 50 100 Custom processing: Yes Material Carbon steel Product description: Square gaskets are refined from high-precision, high-hardness sheet materials, usually used in the adjustment and measurement of precision molds or precision hardware, or as spacers, called square gaskets, sometimes also called molds Spacers or precision gap pieces. Uses: The use of square gaskets: used in electronic instruments, mold manufacturing, precis...
-
Power U-shaped hoop
-
scaffold
-
wedge anchor through bolt
Model Nominal thread 304m6 304m8 304m10 304m12 304m16 316m6 316m8 316m10 316m12 316m16 Nominal length (mm) 60 70 80 90 100 110 120 130 140 150 180 200 250 Custom processing: Yes Material Carbon steel 4.8 grade Product description: The car repair gecko does not have high requirements for the depth and cleanliness of the concrete cavity. It is easy to install and inexpensive. Choose the appropriate embedding depth according to the thickness of the solid roof. As the embedding depth increases, t...
