High reputation U Bolt With Rubber Sleeve - Construction Engineering tower crane bolt – Chuan Ding

Quick Details

>>>

Fasteners usually include the following 12 types of parts:

Bolt: A type of fastener consisting of a head and a screw (cylinder with external thread). It needs to be matched with a nut to fasten and connect two parts with through holes. This type of connection is called bolt connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

Stud: There is no head, only a type of fastener with threads on both ends. When connecting, one end of it must be screwed into the part with internal threaded hole, the other end must pass through the part with through hole, and then the nut is screwed on, even if the two parts are tightly connected as a whole. This type of connection is called a stud connection, which is also a detachable connection. It is mainly used where one of the connected parts has a large thickness, requires a compact structure, or is not suitable for bolt connection due to frequent disassembly.

Screws: It is also a type of fasteners composed of two parts, a head and a screw, which can be divided into three categories according to their use: machine screws, set screws and special purpose screws. Machine screws are mainly used for a tightening connection between a part with a threaded hole and a part with a through hole, without the need for a nut to fit (this type of connection is called a screw connection, which is also a detachable connection; it can also be Cooperate with the nut, used for the fastening connection between two parts with through holes.) The set screw is mainly used to fix the relative position between the two parts. Special purpose screws such as eyebolts are used for lifting parts.